지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
PURPOSES : In areas of high traffic volume, such as expressway across large cities, the amount of nitrogen oxides (NOx) emitted into the atmosphere as air pollution can be significant since NOx gases are the major cause of smog and acid rain. Recently, the importance of NOx removal has arisen in the world. Titanium dioxide ($TiO_2$), that is one of photocatalytic reaction material, is very efficient for removing NOx. The NOx removing mechanism of $TiO_2$ is the reaction of solar photocatalysis. Therefore, $TiO_2$ in road structure concrete need to be contacted with ultraviolet rays (UV) to be activated. In general, $TiO_2$ concretes are produced by replacement of $TiO_2$ as a part of concrete binder. However, considerable portion of $TiO_2$ in concrete cannot contact with the pollutant in the air and UV. Therefore, $TiO_2$ penetration method using the surface penetration agents is attempted as an alternative in order to locate $TiO_2$ to the surface of concrete structure. METHODS : This study aimed to evaluate the NOx removal efficiency of photocatalytic concrete due to various $TiO_2$ application method such as mix with $TiO_2$, surface spray($TiO_2$ penetration method) on hardened concrete and fresh concrete using surface penetration agents. The NOx removal efficiency of $TiO_2$ concrete was confirmed by NOx Analyzing System based on the specification of ISO 22197-1. RESULTS : The NOx removal efficiency of mix with $TiO_2$ increased from 11 to 25% with increasing of replacement ratio from 3 to 7%. In case of surface spray on hardened concrete, the NOx removal efficiency was about 50% due to application amount of $TiO_2$ with surface penetration agents as 300, 500 and 700g/m2. The NOx removal efficiency of surface spray on fresh concrete due to all experimental conditions, on the other hand, which was very low within 10%. CONCLUSIONS : It was known that the $TiO_2$ penetration method as surface spray on hardened concrete was a good alternative in order to remove the NOx gases for concrete road structures.
목차
등록된 정보가 없습니다.
참고문헌 (9)
참고문헌 신청
Beeldens A. / 2006 / An environmental friendly solution for air purification and self-cleaning effect : the application of TiO2 as photocatalyst in concrete / Proceedings of Transport Research Arena Europe-TRA
홍성재 / 2013 / 광촉매 콘크리트 도로 구조물의 효율적 시공방법에 대한 실험적 연구 / 한국도로학회논문집 15(6):1~9
2007 / ISO 22197-1, Test method for air-purification performance of semiconducting photocatalytic materials-Part 1: Removal of nitric oxide / International Standard
Italcementi Group
Kim H. J. / 2000 / Development of Materials to remove Nitrogen Compounds (NOx) of Cement / Conference of Cement Association 153:50~54
홍성재 / 2013 / 광촉매 콘크리트 도로 구조물의 효율적 시공방법에 대한 실험적 연구 / 한국도로학회논문집 15(6):1~9
2007 / ISO 22197-1, Test method for air-purification performance of semiconducting photocatalytic materials-Part 1: Removal of nitric oxide / International Standard
Italcementi Group
Kim H. J. / 2000 / Development of Materials to remove Nitrogen Compounds (NOx) of Cement / Conference of Cement Association 153:50~54
이 논문의 저자 정보
최근 본 자료
댓글(0)
0